Description
This assembly is a new design for the DB style antennas which mounts the 18′ fiberglass telescoping poles directly to the reinforced plate. This greatly reduces the stress on the EHU housing and instead directly transfers the forces from the telescoping poles to the plate and therefore the boom. This assembly also comes with EHU housing flange reinforcement brackets which greatly reduces the chances of over tightening the EHU mounting screws which can crack the housing.
This new assembly weighs just under 1.5Lbs heavier per EHU.
This kit services one EHU only. Order qty should match the number of EHU’s you have on your antenna!
Does not include aluminum saddles or bolts for mounting the plate to the boom as this is antenna specific. Does include new Nylock nuts for the aluminum saddle bolts.
This kit can currently be used on the following antennas: UrbanBeam, DB11, DB18/18E, DB36, and DB42
Kit Contents |
||
Part # | Description | Qty |
70-2030-21 | DB Mounting Plate w/ Reinforcement Wings and Foam Mounting Guide | 1 |
10-1609-11 | DB Mounting Plate Upper Reinforcement Bracket | 1 |
10-1609-21 | EHU Shell Flange Reinforcement Bracket, Side | 1 |
10-1609-31 | EHU Shell Flange Reinforcement Bracket, Top | 1 |
10-1612-01 | Resin Clamp Spacer | 2 |
60-7019-11 | Resin Clamp, 1.5″ (set) | 2 |
60-0100 | Bolt, 1/4 -20 X 3-1/2″, hex head, S/S | 5 |
60-0030 | Nut, 1/4″-20, Nylock, S/S | 5 |
60-0017 | Screw, 10-32 x 3/4″, Panhead, S/S | 11 |
60-0019 | Nut, 10-32, Nylock, S/S | 11 |
60-0018 | Washer, 10-32, Flat, S/S | 5 |
60-0033 | Washer, 5/16″, Flat, S/S | 9 |
10-1502-12 | EHU Gasket, for Black Housing w/ drain hole, Updated spacing | 1 |